Classeq dishwashers and glasswashers

Classeq C400 and C500 undercounter glasswashers and dishwashers, C500 Utensil and CP500 pass through. Made in Britain, two-year parts and labour warranty.

Classeq products

Classeq machines

The water question

Hard water leaves limescale on heating elements and rinse jets, which costs you wash quality and, in time, the machine. Classeq recommends a softener wherever the hardness is above 7° Clark (100ppm), and failing to fit one where it is needed can affect the warranty. You have two routes: a WS model with the softener built in, or a standard model with an external softener. Manual softeners need regenerating with granulated salt; the automatic units use tablet salt and a 13A supply. Note that the 20 litre softener will not fit under a standard dishwash table.

Classeq spec sheets and brochures

Classeq videos

Buying Classeq

Classeq has spent more than 40 years making glasswashers and dishwashers, and designs and builds them in Staffordshire. The current range is deliberately small. There are two undercounter sizes, the C400 and the C500. The C500 Utensil washes gastronorm trays and chopping boards, and the CP500 pass through is for higher volumes. Every machine is commissioned as a glasswasher or a dishwasher when it is installed, and each comes with a two-year parts and labour warranty.

Start with the basket. The C400 takes a 400 x 400mm basket: 16 pint glasses a rack and up to 640 glasses an hour, or nine dinner plates a rack and up to 270 plates an hour. It suits a bar or a small café. The C500 takes a 500 x 500mm basket: 25 pint glasses and up to 1,000 an hour, or 18 plates and up to 540 an hour, which covers most pubs and restaurants. If you wash trays, the C500 Utensil has a deeper tank and a seven-minute utensil programme for up to five 1/1 gastronorm trays or chopping boards. Above that, the CP500 pass through washes up to 720 plates an hour and sits in a straight or corner dishwash line between an entry and an exit table. The hourly figures are Classeq's maximums.

Then check two things on site. Water first: where the hardness is above 7° Clark (100ppm), Classeq recommends a water softener, and running without one where it is needed can affect the warranty. The WS models have an automatic softener built in; otherwise add a separate softener from the accessories. Power second: the undercounter machines come for a 13A single phase, 30A single phase or three phase supply, and the CP500 for 30A single phase (6.5kW), 16A three phase (9.5kW) or 22A three phase (12.5kW). The product code changes with the supply, so if you are not sure what your site has, ask us before you order. Every model has a drain pump, rinse booster pump, and detergent and rinse aid pumps fitted, so drain height and rinse pressure are not a worry.

Classeq: common questions

Is the C400 a glasswasher or a dishwasher?

Either. Every Classeq machine is commissioned as a glasswasher or a dishwasher when it is installed. As a glasswasher the undercounter models run two programmes (1.5 and 2 minutes); as a dishwasher they run three (2, 3 and 5 minutes). The C400's 400 x 400mm basket holds 16 pint glasses or nine dinner plates, so most people buy it for glasses and the C500 for plates.

Do I need the WS model?

Only if your water is hard and you would rather not fit a separate softener. Classeq recommends a softener wherever the total hardness is above 7° Clark (100ppm), and running without one where it is needed can affect the warranty. The WS models have an automatic softener built into the machine. The standard models need an external softener: Classeq makes manual 8, 12, 16 and 20 litre units and automatic cold and hot feed units, and the right size depends on the machine and your water.

Which power supply do I need?

It depends on what is at the machine's position. Undercounter models come in 13A single phase, 30A single phase and three phase versions. The CP500 comes in 30A single phase (6.5kW), 16A three phase (9.5kW) and 22A three phase (12.5kW). Each version has its own product code. Have an electrician confirm the supply before you order; if you send us what they find, we will match the code.

What does steam recovery do on the CP500SR?

It captures the steam that would otherwise come out when the hood opens and uses the heat to preheat the incoming water. Classeq says this removes the need for extraction over the machine and makes the area more comfortable to work in. Ventilation rules vary by site, so check yours with your installer. The steam recovery models are about 70mm taller than the standard CP500.

What is the C500 Utensil for?

Gastronorm trays, chopping boards and utensils that do not fit a standard undercounter. It is a C500 with a deeper wash tank (628mm) and a seven-minute utensil programme that raises the wash and rinse temperatures. It comes with two utensil baskets, each taking up to five 1/1 gastronorm trays or chopping boards, and you can add plate baskets to use it as a dishwasher too.

What warranty comes with a Classeq machine?

Two years parts and labour as standard. Classeq services its machines with its own nationwide team of engineers. If you want longer cover, ask us when you order: Classeq's extended warranty has to be bought at the same time as the machine.

Can you install it?

Yes. We arrange installation and commissioning by Classeq's own engineers and quote it with the machine, along with removal of your old machine or fitting a water softener if you need them. Tell us about your site. The standard connection assumes power, water and waste are within one metre of the machine.

How quickly can I get one?

Classeq makes the range in Staffordshire and quotes a lead time of 1 to 3 days. Delivery is free, and we confirm the delivery date when you order.

All brands · Shop the range